Test Summary
|
45%
successful |
Failed tests
- ErrorsStationTest. Stop transaction due CPU_ERRORS_RED_BUTTON_HARDWARE
- ErrorsStationTest. AllModulesGone for connector #0
- ErrorsStationTest. CpLineBroken for connector #1
- ErrorsStationTest. CPU_ERRORS_MODULES_GONE for connector #2
- ErrorsStationTest. IsolationBroken for connector #2
- ResetTest. Checking soft reset during charging
- ResetTest. Checking hard reset during charging
- SmartChargingTest. one TxDefaultProfile_Absolute_W_one startPeriod
- SmartChargingTest. one ChargingPointMaxProfile_Absolute_W
- SmartChargingTest. one TxDefaultProfile_Relative_W_two periods
- SmartChargingTest. one TxDefaultProfileNull_Absolute_W_one startPeriod
- SmartChargingTest. Set TxDefaultProfile_W_Absolute for first connector with 2 limits
- SmartChargingTest. Check that TXProfile is active only during transaction
- SmartChargingTest. Check that TXProfile with highest stackLevel was only applied
- SmartChargingTest. Applying TxProfile before Charging Station is offline and during offline state
- SmartChargingTest. Apply 3 different profiles ChargingPointMaxProfile, TxDefaultProfile(0) and TxProfile
- SmartChargingTest. Apply 2 different profiles TxDefaultProfile(0) and TxProfile
- SmartChargingTest. Apply 2 different profiles TxDefaultProfile(1) and TxProfile
- SmartChargingTest. Apply ChargingPointMaxProfile and TxProfile, clear TXProfile
- SmartChargingTest. Apply 2 different profiles ChargingPointMaxProfile and TxDefaultProfile(0)
- SmartChargingTest. Check that all profiles were removed after calling clearChargingProfile
- SmartChargingTest. Checking Relative without startSchedule
- SmartChargingTest. Check that all 3 profiles can be rewritten
- SmartChargingTest. Check of ChargingScheduleMaxPeriods (positive and negative cases)
- SmartChargingTest. Apply TxDefaultProfile(0), TxDefaultProfile(1), ChargingPointMaxProfile and TxProfile
- SmartChargingTest. one TxProfile_Absolute_W
- SmartLocalControllerTest. one ChargingPointMaxProfile_Absolute_W
- SmartLocalControllerTest. one TxDefaultProfile_Relative_W_two periods
- SmartLocalControllerTest. one TxDefaultProfileNull_Absolute_W_one startPeriod
- SmartLocalControllerTest. Checking Relative without startSchedule
- SmartLocalControllerTest. Set TxDefaultProfile_W_Absolute for first connector with 2 limits
- SmartLocalControllerTest. Check that TXProfile is active only during transaction
- SmartLocalControllerTest. Check that TXProfile with highest stackLevel was only applied
- SmartLocalControllerTest. Applying TxProfile before Charging Station is offline and during offline state
- SmartLocalControllerTest. Apply 3 different profiles ChargingPointMaxProfile, TxDefaultProfile(0) and TxProfile
- SmartLocalControllerTest. Apply 2 different profiles TxDefaultProfile(0) and TxProfile
- SmartLocalControllerTest. Apply 2 different profiles TxDefaultProfile(1) and TxProfile
- SmartLocalControllerTest. Apply ChargingPointMaxProfile and TxProfile, clear TXProfile
- SmartLocalControllerTest. Apply 2 different profiles ChargingPointMaxProfile and TxDefaultProfile(0)
- SmartLocalControllerTest. Check that all profiles were removed after calling clearChargingProfile
- SmartLocalControllerTest. Check that all 3 profiles can be rewritten
- SmartLocalControllerTest. Check of ChargingScheduleMaxPeriods (positive and negative cases)
- SmartLocalControllerTest. Apply TxDefaultProfile(0), TxDefaultProfile(1), ChargingPointMaxProfile and TxProfile
- SmartLocalControllerTest. one TxProfile_Absolute_W
- SmartLocalControllerTest. one TxProfile_Absolute_A
- SmartLocalControllerTest. one TxDefaultProfile_Absolute_W_one startPeriod
- TransactionAutochargeTest. CableConnected,Start transaction,Output connector, Stop transaction
- TransactionAutochargeTest. ChangeAvailability to Inoperative, CableConnected,Start transaction,Output connector, Stop transaction
- TransactionAutochargeTest. CableConnected, Start transaction,ChangeAvailability to Inoperative, Output connector, Stop transaction
- TransactionAutochargeTest. CableConnected, Start transaction,ChangeAvailability to Inoperative, Output connector, Stop transaction
- UpdateFirmwareTest. Getting the status Installed
- UpdateFirmwareTest. Getting the status DownloadFailed
- UpdateFirmwareTest. Update during the transaction
- UpdateFirmwareTest. Change Availability Rejected during Update Firmware
- IntegrationTest. Ручное удаление ошибки
- IntegrationTest. При активации локального управления не возможна отладка КА
- IntegrationTest. Размыкание через PSM и уход ошибок после выхода из сервисного режима
- IntegrationTest. Выключение и включение сервисного режима при разомкнутых контактрах
- IntegrationTest. Включение и выключение локального режима управления через PSM
- IntegrationTest. Нажатие Software аварийной кнопки
- IntegrationTest. Смена состояния ЗУ LOGICAL_OVERVOLTAGE_RELAY влияет на состояние сервиса, но не влияет на КА
- IntegrationTest. Смена состояния ЗУ DIFFERENTIAL_PROTECTION_RELAY, которое влияет на состояние сервиса и КА CONTACTOR/PERSONAL_POWER_SUPPLY
- IntegrationTest. Смена состояния ЗУ SURGE_PROTECTION_DEVICE, которое влияет на состояние сервиса и КА CONTACTOR/AUXILIARY
- IntegrationTest. Смена состояния ЗУ INSULATION_MONITORING_DEVICE, которое влияет на состояние сервиса и не влияет на КА
- ProfilesTest. Get current profile - day-day2-night
Ignored tests
- SmartChargingTest. GetCompositeSchedule after clearing profile
- SmartChargingTest. one TxDefaultProfile_Absolute_A_one startPeriod
- SmartChargingTest. one ChargingPointMaxProfile_Absolute_A
- SmartChargingTest. one TxDefaultProfile_Relative_A
- SmartChargingTest. one TxDefaultProfile_Absolute_W_three startPeriod
- SmartChargingTest. one TxDefaultProfile_Absolute_A_three startPeriod
- SmartChargingTest. one TxDefaultProfileNull_Absolute_A_one startPeriod
- SmartChargingTest. Check of optional fields validFrom and validTo
- SmartChargingTest. one TxProfile_Absolute_A
- SmartLocalControllerTest. one TxDefaultProfile_Absolute_A_one startPeriod
- SmartLocalControllerTest. one ChargingPointMaxProfile_Absolute_A
- SmartLocalControllerTest. one TxDefaultProfile_Relative_A
- SmartLocalControllerTest. one TxDefaultProfile_Absolute_W_three startPeriod
- SmartLocalControllerTest. one TxDefaultProfile_Absolute_A_three startPeriod
- SmartLocalControllerTest. one TxDefaultProfileNull_Absolute_A_one startPeriod
- SmartLocalControllerTest. Check of optional fields validFrom and validTo
- APITest. Not Supported ConverterSwitchingDevice
- ProfilesTest. ResetLocalManager
- ProfilesTest. Throttling_High
- ProfilesTest. Throttling_Low
- ProfilesTest. Restriction of current
Packages
| Package | Tests | Failures | Ignored | Duration | Success rate |
|---|---|---|---|---|---|
| com.yablochkov.ocpp16.autotest.ocpp16Tests | 108 | 54 | 16 | 1h24m38.24s | 41% |
| com.yablochkov.ocpp16.autotest.psmIO | 26 | 10 | 1 | 8m41.33s | 60% |
| com.yablochkov.ocpp16.autotest.settings | 6 | 1 | 4 | 0.359s | 50% |
Classes
| Class | Tests | Failures | Ignored | Duration | Success rate |
|---|---|---|---|---|---|
| com.yablochkov.ocpp16.autotest.ocpp16Tests.ColdBootTest | 5 | 0 | 0 | 7m14.26s | 100% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.ErrorsStationTest | 12 | 5 | 0 | 6m48.68s | 58% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.GetDiagnosticsTest | 2 | 0 | 0 | 2m56.12s | 100% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.ResetTest | 4 | 2 | 0 | 10m50.60s | 50% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.SmartChargingTest | 39 | 19 | 9 | 21m9.91s | 36% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.SmartLocalControllerTest | 38 | 20 | 7 | 30m29.65s | 35% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.TransactionAutochargeTest | 4 | 4 | 0 | 5m9.02s | 0% |
| com.yablochkov.ocpp16.autotest.ocpp16Tests.UpdateFirmwareTest | 4 | 4 | 0 | 0.002s | 0% |
| com.yablochkov.ocpp16.autotest.psmIO.APITest | 7 | 0 | 1 | 35.192s | 100% |
| com.yablochkov.ocpp16.autotest.psmIO.AVRTest | 5 | 0 | 0 | 3m37.30s | 100% |
| com.yablochkov.ocpp16.autotest.psmIO.IntegrationTest | 14 | 10 | 0 | 4m28.83s | 28% |
| com.yablochkov.ocpp16.autotest.settings.ProfilesTest | 6 | 1 | 4 | 0.359s | 50% |